Comments on: Knit Boot Pattern

By: Rhonda Troglia

Rhonda Troglia — Sat, 10 Oct 2009 08:02:51 +0000

I was thinking about buying this boot kit but wanted to select my own yarn. Do you have any suggestions on what type to buy? I wanted something fairly thick and sturdy.

Thanks.

By: Pat

Pat — Tue, 08 Sep 2009 13:48:53 +0000

Hi, I hope you found the answers to your questions on this site. the boots were made on the 28″ small gauge board and the suede soles and instructions come with the boot kits. If you have knit them, how did they turn out for you?

By: Lorri

Lorri — Wed, 26 Aug 2009 13:41:10 +0000

Hello I was wondering is this boot made on a authentic knitting board? If so where can I get the board and pattern to create these boots and also what did you use for the sole? I would like them to be worn outside.

Thank you for taking time to response to me

Lorri
Bella Designs

By: Pat

Pat — Wed, 19 Nov 2008 18:35:32 +0000

Hi Gwen,

We are actually working on a DVD for the boots to make the directions super easy. Also we will be adding the soles as a separate purchase soon.
….. working on it.

Oh by the way, QVC UK sells the boot kit with the yarn.

Kim

By: Gwen

Gwen — Mon, 17 Nov 2008 18:46:27 +0000

Hi Pat
Because of the postage costs to UK for the kit, have you any plans to publish just the pattern for the boots. This would also mean I wouldn’t have to buy another kit when knitting more than one pair.
Thanks

By: Tanya

Tanya — Thu, 06 Nov 2008 21:08:32 +0000

Any tips if the boot sizes run small or large? I wear both 8 1/2 and 9 shoe sizes depending on the brand. I want to know which kit to get. Thank you!!

By: Pat

Pat — Fri, 03 Oct 2008 15:43:05 +0000

Hi, the ribbing stitch is done by weaving from the first top pin down to the 3rd pin on bottom row. Then weave every other pin to the end. When you return, you will see that you again are weaving on 1st pin to 3rd pin. Each end of board will have 2 consecutive pins in order to weave to end and cover all needles. You start this way on every row. After you do some of the inc and dec rows, the ribs will shift and that is part of the plan and design, so don’t try to adjust your ribs.

As for the decrease and shift-once you do the dec and have the empty needles, you will have 2 loops on some needles. Do the shift either way as long as you bring all the sts together. The pins that have 2 loops, just move both loops over.
After the next weave on the smaller number of sts, you will lift both loops over on those dec stitches.
Pat

By: Sue Kreitzer

Sue Kreitzer — Sat, 27 Sep 2008 22:52:57 +0000

Sandy,
Yes, the rib stitch is from pin #1 to pin #3. If you are going from 1 down to 2, that is the stockinett stitch. Hope this helps. Good luck on your boots. Take pictures

By: Margarett Sharpe

Margarett Sharpe — Thu, 25 Sep 2008 01:05:57 +0000

Having problem in Willobee Boot pattern, decrease row 2- shifting loops over center to cover empty needles. This is not very clear. Do you shift from left to right, moving all loops over to cover needles #21, then #14, then #7. When you shift loops, do you shift the 2 decreased loops,too? The movie about the ribbing stitch was very informative.

By: Sandy Zwicky

Sandy Zwicky — Mon, 22 Sep 2008 00:53:18 +0000

On the rib stitch do you go from the #1 nail to the #3 nail on each row? I think I did my boot in the stockinette stitch instead of the ribbing stitch.I guess I will wait to here from you before I do more. I just received my board on Friday soooo I am really new to this.
Thanks for your time.

Sandy